Air Still for home distillation of water, essential oils and spirits.
£157.98
Please Note: Carriage is payable on this item, but anything ordered with it will be sent carriage free.
This superb stainless steel air cooled "pot still" is perfect for use in the home distillation of water, essential oils and, where legal, alcohol.
It has a working capacity of 4 litres and, when being used for distilling water, need approximately 2 hours to heat up and then a further 2 hours to produce clean, demineralised, distilled water for use in irons, kettles and topping up car or forklift truck batteries.
The item shown here is the version marketed by Still Spirits and is known as the "Air Still". Hambleton Bard also market this item under the name "Smart Still". The basic still is identical and operates in the same way as the one shown here. The main difference between the two is the collector system used in each. The Air Still uses the collection jug shown in this picture and the contents are then filtered using a carbon block.
The Smart Still uses a different collection jug and incorporates its "tea bag" style filter into a separate filter chamber that sits on top of the jug as shown in this picture:
In countries where home distillation of alcohol is permitted, it can be used to produce spirits using the following method:
Mix 6-8kgs of granulated sugar in a few litres of freshly boiled water. Stir until dissolved and in the form of a rich syrup and then top up to 23 litres with water, adjusting the mixture of hot and cold water used to achieve a stable temperature of around 20-24°C.
Mix in a sachet of activated carbon (also known as activated charcoal) and add a sachet of Turbo Yeast. The mixture will be a dirty black colour, but the carbon will absorb most of the unpleasant compounds produced during the rapid fermentation.
Ferment as per the instructions provided with yeast. This can take between 1 and 5 days depending upon the type of yeast and amount of sugar used.
When fermentation is complete, add a sachet of Turbo Clear and leave for 24 hours to completely clear. Syphon off the sediment and dispose of the residue.
If home distillation of spirits is illegal in your home country (as it is in the UK), you can use this fermented wash, which is likely to be between 14-20% ABV, as a base for mixing with the various liqueur and spirit essences that are available.
If home distillation is permitted in your home country, transfer 4 litres of this wash into your still and add some ceramic raschig rings to act as a boil conditioner and prevent the wash from boiling over. Place the smaller clear plastic collection jug underneath the still outlet spout.
Turn on your still and leave to heat up for about an hour. Once the correct temperature is reached, the alcohol will start to distil out, begin to condense in the air cooled tubes in the still cap and will start to drip through the filter chamber into the collection jug.
Depending upon which yeast is used in the initial fermentation, it MAY be necessary to dispose of the first 25ml produced as these may contain some of the less pleasant tasting flavour compounds, however most of these would normally be removed during the filtering through the carbon sachet.
Once you have collected around 650ml, you will probably find that, depending upon the original alcohol strength of the wash, that you may have neat alcohol at a strength of around 60% ABV. This will need to be watered down to "usable strength" prior to using it as a base for mixing into liqueur or spirit essences. 325ml of clean water added to the original 650ml will result in 1075ml of home made spirits at an ABV of around 40%.
Pour this clean liquid through the carbon filter in the other part of the Filter/Collector system. This will clean the liquor and provide a smoother finish. It works best at alcohol concentrations below 50% ABV, which is why it is preferable to water down your high quality spirit prior to final filtration.
Allow the still to cool down and then dispose of the remainder of the wash in the still. Add a further 4 litres and start the process again. Some home distillers recommend not watering down each primary batch of spirits and instead believe that a smoother, cleaner spirit can be produced by collecting ALL of the primary batches and re-distilling the whole lot. This will produce a distillate with an ABV of around (or possibly in excess of) 80%, but with a much reduced volume. To a large extent, it is really a matter of personal preference.
I would re-iterate that home distillation of spirits is ILLEGAL in the UK, even for home/personal use. These instructions for producing spirits using a home still are provided purely for information purposes only and should not be followed within the UK.
to all UK Mainland destinations (not Scottish Highlands or N.Ireland)
Our weight breaks are based on the TOTAL weight of your order, not each individual item, but many of the smaller items travel as Large Letters and Packets because of their size.
