Replacement 2" lids for Standard Barrels.

Colchester Homebrew Supplies - Online Store > Equipment > Spare Parts

Replacement 2
  • Replacement 2" lids for Standard Barrels.
  • Replacement 2" Vent Cap
  • Replacement 2" Cap fitted with a Valve

  • Replacement 2" lids for Standard Barrels.

  • Replacement 2 inch diameter lid to fit both the 2 gallon and and 5 gallon standard barrels. Available as a Vent lid or Gas Injection lid.
  • £3.65
2" Barrel Cap Options:

:  at  £3.65  each

10 in stock.

This replacement 2 inch diameter lid has a simple pressure release vent cap and fits both the 2 and 5 gallon basic barrels.

If you use, or wish to fit, a gas injection system, the 2" lid is also available bored for use with an existing valve or pre-fitted with either a Pin valve or S30 valve.

These lids are labelled "Lubricate the seal before use". In practice, if you put vaseline on the white 2" O-ring, you will find that you have difficulty in obtaining a good seal, The Vaseline should, instead, be rubbed onto the threads, rather than the O-ring.

These lids are designed to work on standard barrels supplied to us by Youngs and Ritchies from 2009 onwards. It may not fit on barrels manufactured before this date, or supplied by other distributors, as the screwthread that attaches the lid to the barrel may be different.